Sens Converter

Marvel Rivals to Overwatch 2 Sensitivity Converter

Transfer your horizontal hipfire turn distance. Both games are selected below; enter your sensitivity and DPI.

Your new sensitivity

–

    cm/360
    –
    in/360
    –
    eDPI (from)
    –
    eDPI (to)
    –

    Convert Overwatch 2 to Marvel Rivals instead →

    How Marvel Rivals to Overwatch 2 sensitivity conversion works

    Moving between Marvel Rivals and Overwatch requires a scale change, not a direct copy of the number. Start with the base horizontal setting in each game and inspect any character-specific overrides before testing a full turn.

    At equal DPI, multiply your Marvel Rivals setting by 2.65152. To reverse the conversion, divide by that factor. The number changes because the two games interpret sensitivity units differently; the distance travelled by your mouse is the quantity being matched.

    Target sens = source sens × 2.65152 × source DPI ÷ target DPI

    For example, 1.6 in Marvel Rivals at 800 DPI becomes approximately 4.24242 in Overwatch 2 at 800 DPI. Both describe 40.82 cm for one complete horizontal turn before rounding. Keep the unrounded value in the tool if you plan to swap directions again.

    Marvel Rivals → Overwatch 2: calculated examples, not recommended player settings
    Marvel Rivals
    sens / DPI    		Overwatch 2
    sens / DPI    		Exact
    cm/360
    1.6 / 8004.24242 / 80040.82
    1.6 / 8002.12121 / 160040.82
    2 / 8005.30303 / 80032.66

    The first two rows keep the source setup fixed and change only the target DPI. The third changes source sensitivity. This separates a hardware-DPI change from an in-game sensitivity change, which is useful when comparing two saved configurations.

    Settings to check in each game

    Marvel Rivals

    Settings > Keyboard > Combat > Mouse > Mouse Horizontal Sensitivity

    Use Mouse Horizontal Sensitivity under the combat mouse settings. The vertical value is separate. At equal DPI the horizontal number is four times the Valorant number, but the different camera presentation can make the same turn distance look different. Do not judge a conversion solely by how quickly an object crosses the display.

    Model last verified: . See Marvel Rivals sources and full conversion guide.

    Overwatch 2

    Options > Controls > General > Mouse > Sensitivity

    Use the base mouse sensitivity and check whether the selected hero overrides it. The 0.0066 scale is numerically finer than Valorant or CS2, so compare physical distance rather than the size of the setting. Scoped hero controls are independent from the hipfire conversion.

    Model last verified: . See Overwatch 2 sources and full conversion guide.

    FOV and ADS: why these games can still feel different

    A full-turn match does not promise equal movement across the screen. A different field of view, aspect ratio or camera perspective can alter the apparent speed of a target. Compare the same physical mouse travel first, then decide whether a different visual feel needs a personal adjustment.

    Marvel Rivals and Overwatch 2 also keep some aiming controls separate from their base horizontal setting. This tool does not calculate a monitor-distance match, a scoped multiplier, controller aim or vertical sensitivity. Apply the result to the named setting, then evaluate those other controls independently.

    To verify the transfer, mark a starting point on the mousepad and move horizontally until the camera completes a turn. Repeat in both games with acceleration and game-specific modifiers accounted for. If space is limited, compare half-turns using half the reported cm/360 distance. Menu rounding can cause a small mismatch; a large mismatch calls for checking DPI, the input unit and game settings.

    Marvel Rivals to Overwatch 2 FAQ

    How do I convert Marvel Rivals sensitivity to Overwatch 2?

    At the same DPI, multiply your Marvel Rivals sensitivity by 2.65152. For two different DPIs, also multiply by source DPI divided by target DPI. This matches horizontal hipfire turn distance under the stated game settings.

    What is 1.6 Marvel Rivals sensitivity in Overwatch 2?

    1.6 at 800 DPI converts to approximately 4.24242 Overwatch 2 sensitivity at 800 DPI, for 40.82 cm/360 before menu rounding. These are worked examples, not professional-player recommendations.

    Does changing DPI change the result?

    Yes. Enter the original DPI and New DPI separately. For linear scales, doubling the target DPI halves the target sensitivity. For an offset or non-linear slider, use the calculated result instead of halving the menu number.

    Does this also convert FOV, ADS or scopes?

    No. The tool matches horizontal hipfire rotation, not screen-space movement or zoom. FOV can still change perceived speed even when turn distance is equal. Check each game’s notes before adjusting a scope or a character-specific control.

    Related sensitivity conversions

    Marvel Rivals converter · Overwatch 2 converter · cm/360 calculator