Sens Converter

Valorant to Counter-Strike 2 Sensitivity Converter

Transfer your horizontal hipfire turn distance. Both games are selected below; enter your sensitivity and DPI.

Your new sensitivity

–

    cm/360
    –
    in/360
    –
    eDPI (from)
    –
    eDPI (to)
    –

    Convert Counter-Strike 2 to Valorant instead →

    How Valorant to Counter-Strike 2 sensitivity conversion works

    Valorant and CS2 use different horizontal scales, even though both reward controlled crosshair placement. Transfer the physical turn distance first, then check short corrections and a 180-degree turn before changing either game’s zoom settings.

    At equal DPI, multiply your Valorant setting by 3.18182. To reverse the conversion, divide by that factor. The number changes because the two games interpret sensitivity units differently; the distance travelled by your mouse is the quantity being matched.

    Target sens = source sens × 3.18182 × source DPI ÷ target DPI

    For example, 0.4 in Valorant at 800 DPI becomes approximately 1.27273 in Counter-Strike 2 at 800 DPI. Both describe 40.82 cm for one complete horizontal turn before rounding. Keep the unrounded value in the tool if you plan to swap directions again.

    Valorant → Counter-Strike 2: calculated examples, not recommended player settings
    Valorant
    sens / DPI    		Counter-Strike 2
    sens / DPI    		Exact
    cm/360
    0.4 / 8001.27273 / 80040.82
    0.4 / 8000.63636 / 160040.82
    0.5 / 8001.59091 / 80032.66

    The first two rows keep the source setup fixed and change only the target DPI. The third changes source sensitivity. This separates a hardware-DPI change from an in-game sensitivity change, which is useful when comparing two saved configurations.

    Settings to check in each game

    Valorant

    Settings > General > Mouse > Sensitivity: Aim

    Read Sensitivity: Aim rather than the Scoped Sensitivity Multiplier. Valorant’s relatively small decimal is normal for its 0.07 scale: copying a CS2 or Overwatch number directly changes your turn distance substantially. Keep the base aim setting and scope multiplier in separate notes so you can undo a change without losing your original setup.

    Model last verified: . See Valorant sources and full conversion guide.

    Counter-Strike 2

    Settings > Keyboard / Mouse > Mouse Sensitivity (or the console command: sensitivity <value>)

    Use the Mouse Sensitivity value or the sensitivity console command, with the standard horizontal scale. A custom m_yaw changes the relationship behind the table. The catalog retains the CS:GO scale, but a shared engine or similar menu name is not enough to assume that another game uses it: Deadlock is a notable counterexample.

    Model last verified: . See Counter-Strike 2 sources and full conversion guide.

    FOV and ADS: why these games can still feel different

    A full-turn match does not promise equal movement across the screen. A different field of view, aspect ratio or camera perspective can alter the apparent speed of a target. Compare the same physical mouse travel first, then decide whether a different visual feel needs a personal adjustment.

    Valorant and Counter-Strike 2 also keep some aiming controls separate from their base horizontal setting. This tool does not calculate a monitor-distance match, a scoped multiplier, controller aim or vertical sensitivity. Apply the result to the named setting, then evaluate those other controls independently.

    To verify the transfer, mark a starting point on the mousepad and move horizontally until the camera completes a turn. Repeat in both games with acceleration and game-specific modifiers accounted for. If space is limited, compare half-turns using half the reported cm/360 distance. Menu rounding can cause a small mismatch; a large mismatch calls for checking DPI, the input unit and game settings.

    Valorant to Counter-Strike 2 FAQ

    How do I convert Valorant sensitivity to Counter-Strike 2?

    At the same DPI, multiply your Valorant sensitivity by 3.18182. For two different DPIs, also multiply by source DPI divided by target DPI. This matches horizontal hipfire turn distance under the stated game settings.

    What is 0.4 Valorant sensitivity in Counter-Strike 2?

    0.4 at 800 DPI converts to approximately 1.27273 Counter-Strike 2 sensitivity at 800 DPI, for 40.82 cm/360 before menu rounding. These are worked examples, not professional-player recommendations.

    Does changing DPI change the result?

    Yes. Enter the original DPI and New DPI separately. For linear scales, doubling the target DPI halves the target sensitivity. For an offset or non-linear slider, use the calculated result instead of halving the menu number.

    Does this also convert FOV, ADS or scopes?

    No. The tool matches horizontal hipfire rotation, not screen-space movement or zoom. FOV can still change perceived speed even when turn distance is equal. Check each game’s notes before adjusting a scope or a character-specific control.

    Related sensitivity conversions

    Valorant converter · Counter-Strike 2 converter · cm/360 calculator