Sens Converter

Valorant to Rainbow Six Siege Sensitivity Converter

Transfer your horizontal hipfire turn distance. Both games are selected below; enter your sensitivity and DPI.

Your new sensitivity

–

    cm/360
    –
    in/360
    –
    eDPI (from)
    –
    eDPI (to)
    –

    Convert Rainbow Six Siege to Valorant instead →

    How Valorant to Rainbow Six Siege sensitivity conversion works

    Siege’s horizontal slider assumes MouseSensitivityMultiplierUnit=0.02, while Valorant has no corresponding setting in this converter. Check that multiplier before transferring sensitivity; an altered Siege config can invalidate an otherwise correct ratio.

    At equal DPI, multiply your Valorant setting by 12.2173. To reverse the conversion, divide by that factor. The number changes because the two games interpret sensitivity units differently; the distance travelled by your mouse is the quantity being matched.

    Target sens = source sens × 12.2173 × source DPI ÷ target DPI

    For example, 0.4 in Valorant at 800 DPI becomes approximately 4.88692 in Rainbow Six Siege at 800 DPI. Both describe 40.82 cm for one complete horizontal turn before rounding. Keep the unrounded value in the tool if you plan to swap directions again.

    Valorant → Rainbow Six Siege: calculated examples, not recommended player settings
    Valorant
    sens / DPI    		Rainbow Six Siege
    sens / DPI    		Exact
    cm/360
    0.4 / 8004.88692 / 80040.82
    0.4 / 8002.44346 / 160040.82
    0.5 / 8006.10865 / 80032.66

    The first two rows keep the source setup fixed and change only the target DPI. The third changes source sensitivity. This separates a hardware-DPI change from an in-game sensitivity change, which is useful when comparing two saved configurations.

    Settings to check in each game

    Valorant

    Settings > General > Mouse > Sensitivity: Aim

    Read Sensitivity: Aim rather than the Scoped Sensitivity Multiplier. Valorant’s relatively small decimal is normal for its 0.07 scale: copying a CS2 or Overwatch number directly changes your turn distance substantially. Keep the base aim setting and scope multiplier in separate notes so you can undo a change without losing your original setup.

    Model last verified: . See Valorant sources and full conversion guide.

    Rainbow Six Siege

    Options > Controls > Mouse Sensitivity Horizontal

    These examples assume MouseSensitivityMultiplierUnit=0.02. A downloaded config or an old personal tweak may change that value. For a target Siege result, multiply the default result by 0.02 divided by your custom multiplier. For a source Siege value, first normalize it by multiplying by your custom multiplier divided by 0.02.

    Model last verified: . See Rainbow Six Siege sources and full conversion guide.

    FOV and ADS: why these games can still feel different

    A full-turn match does not promise equal movement across the screen. A different field of view, aspect ratio or camera perspective can alter the apparent speed of a target. Compare the same physical mouse travel first, then decide whether a different visual feel needs a personal adjustment.

    Valorant and Rainbow Six Siege also keep some aiming controls separate from their base horizontal setting. This tool does not calculate a monitor-distance match, a scoped multiplier, controller aim or vertical sensitivity. Apply the result to the named setting, then evaluate those other controls independently.

    To verify the transfer, mark a starting point on the mousepad and move horizontally until the camera completes a turn. Repeat in both games with acceleration and game-specific modifiers accounted for. If space is limited, compare half-turns using half the reported cm/360 distance. Menu rounding can cause a small mismatch; a large mismatch calls for checking DPI, the input unit and game settings.

    Valorant to Rainbow Six Siege FAQ

    How do I convert Valorant sensitivity to Rainbow Six Siege?

    At the same DPI, multiply your Valorant sensitivity by 12.2173. For two different DPIs, also multiply by source DPI divided by target DPI. This matches horizontal hipfire turn distance under the stated game settings.

    What is 0.4 Valorant sensitivity in Rainbow Six Siege?

    0.4 at 800 DPI converts to approximately 4.88692 Rainbow Six Siege sensitivity at 800 DPI, for 40.82 cm/360 before menu rounding. These are worked examples, not professional-player recommendations.

    Does changing DPI change the result?

    Yes. Enter the original DPI and New DPI separately. For linear scales, doubling the target DPI halves the target sensitivity. For an offset or non-linear slider, use the calculated result instead of halving the menu number.

    Does this also convert FOV, ADS or scopes?

    No. The tool matches horizontal hipfire rotation, not screen-space movement or zoom. FOV can still change perceived speed even when turn distance is equal. Check each game’s notes before adjusting a scope or a character-specific control.

    Related sensitivity conversions

    Valorant converter · Rainbow Six Siege converter · cm/360 calculator